FREE Express Shipping in Australia

SG Guitar Wiring Harness

5.00 out of 5
(1 customer review)


Quality wiring kit for your Gibson, Epiphone or SG copy.



Where it all began…

First introduced in 1961, the Gibson SG was created as a variation of the Les Paul with a lighter contoured body and easier access to higher frets on the neck.

Over the years, many notable guitarists have favoured the SG and helped establish it as a classic. These players include Angus Young of AC/DC, Tony Iommi of Black Sabbath, and Eric Clapton.

From an electrical standpoint, the SG usually features the same setup as its Les Paul brother – two pickups with volume and tone control for each, and a 3-way pickup selector.

The electrical low-down…

The electrical components inside your guitar are almost never seen and thus, easily forgotten. A number of large guitar manufacturers know this and often “skimp” on the quality of components used and the way they wire them to save on costs.

Something not every player considers…

Replacing your guitar’s pickups is an easy way to improve or alter your tone. But what a lot of players don’t think about is how their signal is carried from the pickups to the amp.

Your signal passes through the guitars wiring harness before travelling to your amp. You do not want crappy components or dodgy wiring robbing you of tone!

This is where Guitar Sauce comes in…

I build your wiring harnesses using the best premium components available and I build them with 110% attention to detail. I also offer unlimited support for the lifetime of your harness.

Your new wiring harness will also help if your guitar is suffering from any of the following:

  • Scratchy pots
  • Signal cuts in and out
  • Tone controls make no difference to your tone
  • Tone becomes too muddy when rolling back the volume
  • Volume or tone controls have no “sweep” and are very abrupt

Your SG wiring harness includes:

4x Premium CTS 500k audio pots
I’ve tried CTS pots from various suppliers and these are the best I have found. Solid brass shaft and bushing. C-clip reinforced shaft and a 30% taper which offers a perfect sweep. I make sure they are all matched to within a +/- 2% tolerance.

Switchcraft short straight toggle switch
The best toggle switch around. These are robust and will last for years.

2x Sprague Orange Drop .022uf capacitors
The classic capacitor used since the 1960’s. Known for their tone and reliability, these capacitors are used by many high-end guitar manufacturers and builders around the world.

Switchcraft mono output jack
The industry standard for output jacks. Solid and dependable.

Vintage style cloth covered 22 gauge black wiring

This quality vintage style wiring is pre-tinned which means it holds its shape and makes soldering a lot easier for you.

All kits are wired with 50’s style wiring.

Some extra info to help you out…

Your new wiring kit will fit directly into American made Gibson SG and any other SG style guitar which use imperial sized pots.

If your guitar is an Epiphone SG or an SG style guitar which currently uses metric sized pots then you will need to slightly widen the holes in the body to fit the upgraded CTS pots.

I have written a helpful guide here which covers the difference between imperial and metric guitar pots, how to check your current pots, and making sure your knobs will fit your new pots.

Additional information

Left or Right Hand

Right Hand, Left Hand

Switch Tip Colour

Black, Cream

Knob Set

Amber Bell Knobs (x4), Amber Speed Knobs (x4), Black Bell Knobs (x4), Black Speed Knobs (x4), Gold Bell Knobs (x4), Gold Speed Knobs (x4), None

1 review for SG Guitar Wiring Harness

  1. 5 out of 5

    Tim Bowles (verified owner)

    All I can say is total transformation of the quality of sound, And I didn’t think that P90 pickups could sound so powerful so there you go! One very happy customer!

Add a review

SG Guitar Wiring Harness
Have a Question?
This field is for validation purposes and should be left unchanged.

© 2021 Guitar Sauce